JVC RS3000

[woofer]

The difference is going to be a lot smaller than I expected.

Thats good to hear.....it will make alot of users who cant afford a Lumagen OR HTPC very happy..

[tigerhonaker]

The difference is going to be a lot smaller than I expected.

Mike, 

A heck of a lot Less-Expensive for sure.

I sure hope they (JVC) can do the same for the RS4500. 

Terry

[AVSCraig]

How to update your firmware ( if you haven't done it before ) - 

https://www.youtube.com/watch?v=1AMPsl3HidE&feature=youtu.be

[David Vaughn]

How to update your firmware ( if you haven't done it before ) -

https://www.youtube.com/watch?v=1AMPsl3HidE&feature=youtu.be

That's a tease...the firmware isn't on the site yet! Isn't is tomorrow in Japan?

[AVSCraig]

That's a tease...the firmware isn't on the site yet! Isn't is tomorrow in Japan?

Supposed to be tomorrow on the US site too. Check in the morning - 

https://www3.jvckenwood.com/english/download/dla-nx9_dla-nx7_dla-nx5_dla-n7_dla-n5_dla-n11_dla-n8_dla-n6_dla-rs3000_dla-rs2000_dla-rs1000/

[David Vaughn]

Supposed to be tomorrow on the US site too. Check in the morning -

https://www3.jvckenwood.com/english/download/dla-nx9_dla-nx7_dla-nx5_dla-n7_dla-n5_dla-n11_dla-n8_dla-n6_dla-rs3000_dla-rs2000_dla-rs1000/

I know...I'm just giving Chris a hard time...I know he reads these threads

[AVSMike]

To help you get ready for the update.
https://www.youtube.com/watch?v=1AMPsl3HidE&feature=youtu.be

[AVSCraig]

To help you get ready for the update.
https://www.youtube.com/watch?v=1AMPsl3HidE&feature=youtu.be

I beat you to that already !  

[AVSMike]

Here you go.
https://www3.jvckenwood.com/english/download/dla-nx9_dla-nx7_dla-nx5_dla-n7_dla-n5_dla-n11_dla-n8_dla-n6_dla-rs3000_dla-rs2000_dla-rs1000/

[David Vaughn]

Mine is updating as of 7:39 PST tonight (downloaded at 7:38 ) 22 minute update, so I should be done any minute now. 

[AVSMike]

New list of codes with added functions for firmware 3.1.

[AVSMike]

Frame adapt
When in auto mode, it looks at frames or scenes and selects what it feels is most appropriate. So it will vary between low, medium and high throughout the movie.  So for images above 2,000 nits, it selects low. For images between 500 and 2,000 nits it selects medium and for images below 500 nits, it selects high.

Frame Adpt Menu
Static: This is for a fixed nit level, like with UB9000 with HDR Optimizer.

Frame by frame: as the name says, will analyze frame by frame for DTM.

Scene by Scene: as the name says, will analyze scene by scene for DTM.


Filter
Normal is no filter, same as HDR no filter we had before.
Wide is with BT2020 filter. DCI color space.

[DLCPhoto]

Filter
Normal is no filter, Rec709 color space.
Wide is with BT2020 filter. DCI color space.

This is unexpected.  In recent JVC Projector generations, one had the choice of BT2020 Color Space, with or without the Color Filter, with the Filter providing greater color coverage at the expense of some light.

Have they removed this option, or did your source mis-speak?

[AVSMike]

This is unexpected.  In recent JVC Projector generations, one had the choice of BT2020 Color Space, with or without the Color Filter, with the Filter providing greater color coverage at the expense of some light.

Have they removed this option, or did your source mis-speak?

I was given slightly wrong information. Normal is the old HDR mode, so slightly wider than Rec709. I have corrected the post above.

[Manni]

New list of codes with added functions for firmware 3.1.

Hi Mike,

Would you have the IP Control codes for the new commands (especially the DTM profile?)
Thanks!