The Ellis Family Go Big or Go Home HT

NBPk402 · « **on:** November 03, 2016, 06:12:53 PM »

Our HT is 99% complete, and was built from a 2 car garage utilizing the room with in a room technique.

First reflection panels:

1. (3) 2'x4' panels on the left and right walls made of 2 layers of Roxul R80 2" thick sheets (6 in total).
2. (6) 2'x4' panels on the ceiling made the same as the side wall panels.
3. Front wall behind screen is covered with 3" of Roxul R60 wall to wall, and 4' high (from the ceiling to 4' down).
4. Rear wall has 9" of Roxul R60 wall to wall except for the corners which are R80.
5. Front stage is stuffed with R19 Pink Fluffy, and topped with OSB.
6. Rear seating stage is stuffed with Pink Fluffy, and topped with OSB.

Room Construction:

1. Room within a room construction with R19 insulation (inner, and outer walls).
2. Complete sub floor is stuffed with R19 topped with OSB.
3; One layer of OSB covers the wall with a 2nd layer of drywall separated by Green Glue on all four walls.
4. Hat channels on the ceiling with 2 layers of drywall separated by Green Glue.
5. 2 solid core wood doors with 2 layers of 3/4 MDF added.
6. Fire clay used for all outlets, and switches to seal the hole.
7. Automatic door closers on both entry doors.
8. Automatic door seals on both entry doors.
9. Door seals for the area around the doors.
10. 1950 Art Deco glass door handles (inside HT one is modified with Blue LEDs, and frosted finish).

Room Finish:

1. All of the walls will have Blue or Black GOM covered panels (as will the ceiling), but only the ones listed will have any acoustic materials added to them.
2. The stage is covered with Home Depot black carpet, and the soffits are covered with Jo Annes Black Triple Velvet (after the complete room was painted flat black).
3. Floor has Lowes Plum colored Carpet with premium pad.

Equipment:

Front stage...
1. JBL 2360A horns with EV DH1a drivers for the front 3 channels.
2. DIY 1/4 Pie Bass Bins.
3. Danley DTS-10 subs (one under the front stage, and the other under the rear seating area).
4. (2) MiniDSP DDRC-88M processors for Dirac and crossover for the front 3 channels, and subs.
5. (2) Crest Audio CM2208 8 channel amps for my bass bins, Atmos channels, and Surround channels .
6. (1) Yamaha P7000s amp for the subs.
7. Yamaha CXA-5100 preamp
8. Yamaha XM-4080 for the front horns.

Surround...
1. Surround, and rear surround speakers are JBL 8340As

Atmos...
1. (4) JBL 8320 speakers

Media...
1. DIY Unraid NAS
2. i3NUC for HA PC
3. i3 NUC for Media Server.
4. PS3 for gaming
5. XBox One for gaming.
6. Pioneer Elite BDP-80FD BR player

Video...
1. Panasonic AE8000 projector.
2. SeymourAV 195" diagonal scope AT screen.
3. Darbee Darbet Processor.
4. Monoprice Redmere cables.
5. Panamorph UH-480 Anamorphic Lens

Miscellaneous...
1. APC UPS for Computers.
2. APC UPS for Projector.
3. Monster 7000 for power conditioning.
4. Samsung Galaxy Note for control via CQC HA Software.
5. Monoprice speaker wire.
6. (2) Furman PL8s.

Lighting...
1. Blue LED rope lighting for the soffits, stairs, and entry hallway.
2. LED spot lights in soffits for entry, and exit lighting.