2017 Yamaha Aventage Owner's Thread (A670, A770, A870, A1070, A2070, A3070)

[AVSjd]

2017 AVR Info
No LPF for LFE setting
2.4Ghz only supported
Future firmware update for Dolby Vision/HLG/Tidal/Deezer
vTuner replaced by TuneIn
3 year warranty

Features listed in lower model are also included in higher model unless improved upon in higher model

RX-A670   – 7.2, 80W, 4/1 HDMI 2.0a(HDR), 4k/60 4:2:0 pass through,HDCP 2.2 (4/1), Aluminum front
                          panel, Bluetooth, networking (Spotify Connect, Pandora, TuneIn, Airplay), AM/FM, YPAO – 1 mic
                          position  + global crossovers , DAC – Burr Brown 24 bit,  Subwoofer Trim, ARC, 3D, A.DRC; OSD,
                          Zone B, DSD over HDMI, MusicCast, Bluetooth Audio Send (headphones),  Remote ID, 17 DSP modes,
                          Scene (4), ART Wedge (center foot), Atmos 5.2.2, DTS:X, Zone B, Surround Back/Presence, 2 DSPs,
                          Bluetooth/USB/network in ZoneB only when also playing in the main zone, DTS Neo:6 Cinema/Music
                          No [analog -> HDMI, Zone 2, Front HDMI, PEQ]

RX-A770 – 7.2, 90W, 6/1 HDMI 2.0a, 4k/60 4:4:4 upscaling/pass through, Analog (480i only) -> HDMI,
                          HDCP 2.2 (3/1), HDMI+USB (front panel), DC Out/USB (back panel), Networking (Spotify, Pandora,
                          TuneIn, Airplay, Rhapsody, SiriusXM), MHL (front HDMI; HD video and audio from phone/portable
                          device), Zone 2/Presence speaker posts, Zone 2 pre-outs (fixed/variable), AVout, Comp IN (1), Opt IN
                          (2)/Coax IN(2), AM/FM Tuner, 12v Trigger (1), Remote In (1)/Out(1), HDMI Standby Pass Through
                          (select source with AVR in standby), Intelligent Amp Assign (7.1 + 1Zone, no audio from surround
                          back; 5.1.2+1Zone, no audio from FP); 7.1 or 5.1.2 (ie. SB/FP silent); Advanced GUI; Web Browser
                          control, WAV/FLAC 192khz/24hz; YPAO RSC– only 1 mic position + individual crossover, Burr Brown
                          DACs – 24 bit (all channels), Dialog Lift (no presence speakers required), YPAO Volume (incl A.DRC),
                          PHONO, 21:9 cinema scope aspect ratio,
                          Intelligent Amp Assign (Zone 2/Surround Back), Parametric EQ down to 15.6Hz, Neo:6 Cinema/Music,
                          Party Mode (Stereo HDMI audio to Zone 2), 17 DSP modes
         
RX-A870 – 7.2, 100W, 8/2 HDMI 2.0a (Main,Main), HDCP 2.2 (3/2), 7.2 pre-outs, RS-232, YPAO – 8 mic
                          positions + individual crossover, Sub EQ, 5.1 + FH presence speakers/Zone 2; 6/8 ohm setting, 
                          Dolby Surround (presence speakers only), 

RX-A1070 – 7.2, 110W, 8/2 HDMI 2.0a (Main, Main/Zone 2), HDCP 2.2 (7/2), ESS Tech ES9006A SABRE
                          DAC, 7.2/ Zone 2 pre-outs, Comp IN(2), 12v Trigger (2), Upgraded speaker posts, 5.1 + Bi-amp + SB
                          (ext amp), 7.1 or Dolby Atmos (5.1.2 or 3.1.2), DTS:X, Zone 2/Front Presence/Bi-amp speaker posts,
                         HDMI/optical/digital coax PCM 2.0 -> Zone 2, Speaker Config “Pattern” (2 EQ’s can be stored), Scene
                         (4 on front panel+8 addl on GUI – main zone; 4 – Zone 2), 23 DSP programs, DSD Direct, Zone Extra
                         Bass, Zone Volume Equalizer (Tone Control), Analog (1080i) -> HDMI, 64 bit YPAO; Cinema DSP HD3,
                         24 DSP programs (incl Enhanced),
                         No[Composite video input on front panel; Component video output]

RX-A2070 – 9.2, 140W, 8/2 HDMI 2.0a (Main, Zone Out [Main/Adv. Zone 2 (network/ ana/HDMI)/ Zone
                         4 (HDMI only)]), Zone GUI, ESS ES9006A SABRE 24 bit DACs (2x, all channels), 7.2 Pre-outs only (No
                         FP/RP pre-outs); Zone 2/3/Front/Rear Presence speaker posts (2 sets), Remote IN(2)/OUT(2); Dual
                         sub EQ (L/R, F/B, or mono); Digital to Zone 3, Dolby Atmos + Dolby Surround Upmixer (5.2.4 or
                         7.2.2), 7.1 + Front (ext amp) +  Zone 2/3, Speaker posts for Zone 2/3/Front Presence and Zone
                         2/3/Rear Presence, GUI in Zone 2/4, Cinema DSP 3D (using 7.1 setup  creates virtual Front Presence);
                         Programmable remote (ext devices), Bluetooth/USB/network in Zones 2/3 only when also playing in
                         the main zone, Video Adjustment settings , Zone 2/3 pre-outs,  YPAO 3D (angle/height) measurement
                         using 3-leg stand; Scene (Zone 3 – 4); 5.1.2 + Bi-amp
                         No [7.2.2 using RP only)

RX-A3070 – 9.2, 150W, 8/2 HDMI 2.0a, 7.2 pre-outs + Zone 2/FP + Zone 3/RP pre-outs (expandable to
                         11.2 using F, RP, FP+RP);  SABRE 32 Pro Premier ES9026PRO DAC (7 main CH) +  SABRE 32 Ultra
                         ES9016S DAC (Presence CH), Burr Brown 5101 (Net/USB, Zone 2), FP/RP share pre-outs with Zone
                         2/3 Zone 2/Front Presence + Zone 3/Rear Presence pre-outs (can’t do both Zone + Presence), Atmos
                         (7.2.4), Cinema DSP HD3 (using Front Presence in 9.1 setup creates virtual Rear Presence) can be
                         applied to Atmos/DTS:X, (3) Digital Processors; 2.0 XLR inputs

*** Note:  When expanding to 11CH, Zone 3 pre-outs are disabled

[AVSjd]

These models (all but A3070) should be released sometime this month.  We are currently taking pre-orders for all models to include for the A3070.  Call for pricing if interested.

[AVSjd]

Yamaha released an early shipment of (2) Yamaha A3070 units to us this week, however, one was already pre-sold, so we still have one A3070 available.  Uncertain as to when we will get the next shipment, but they generally only come in either onzies or twozies for the first few shipments so get your pre-order in if interested in any of these 2017 models.   Call for pricing if interested.

[AVSjd]

The 2nd A3070 has been sold, however, we're still taking pre-orders for the next shipment.  The next model we're expecting is the A1070 with 2 units expected in tomorrow Tuesday, June 27.  Call for pricing if interested.

[AVSjd]

The two A1070's have arrived and are available for purchase. 

We have two A2070's due in this Friday (arrived 6/30 and available for purchase).

[AVSjd]

Still waiting on our next A3070 order; however, taking pre-orders at this time.

[AVSjd]

Another order of A3070's came in yesterday, but pre-orders took all but one.  Call for pricing if interested in this 9CH "flagship" AVR from Yamaha.

[AVSjd]

We now have all of the upper level Aventage "A" models available for purchase.  Call for pricing and delivery times if interested.

[AVSjd]

We still have (1) A1070 and (1) A3070 available.   For for our clearance pricing.