2017 Denon AVR models ---> S530BT/S730H/S930H/X1400H/X2400H/X3400H/X4400H/X6400H D+M USA has started to release information on the new 2017 Denon models beginning with the three new "S" series models. The lower "X" series models should be announced in April with the higher "X" series announced later this summer. A new “flagship” model to replace the X7200WA should be announced later this fall and is expected to be released in Spring 2018 and will have a separate dedicated Owner's thread.
What's new or being added via a firmware update for the 2017 models? S530BT- HDMI Control/ARC/TV Audio Switching (added for the first time on this lowest model)
- Bluetooth Auto-Select (ON/OFF – prevents Bluetooth devices from powering on the AVR or selecting Bluetooth source when in range)
- Restart - (in lieu of having to pull power cable)
- 4K Signal Format (not a setting on this model rather it simply internally factory defaults to Enhanced (4K60,4:4:4, 10 bit video) and cannot be changed
S730H/S930H/X1400H/X2400H/X3400H- AK4458VN 32 bit DAC (primary)
- PCM5100 32 bit DAC (Network)
- Bluetooth Version 3.0, Class 1 - up to 98ft/30m
- Audyssey iOS/Android phone app ($20) - (first released for the 2016 models) using the Audyssey mic, provides the ability to customize Audyssey EQ speaker/sub curves, save them, and load back to the AVR in only a couple of minutes
- The "H" series models include a HEOS module which will allow streaming the (currently) 12 music services using the HEOS iOS/Android app to the "H" AVR model as well as allow streaming 2CH sources (analog from X2400H and lower; digital+analog on X3400H and higher) from the AVR to one or up to 32 HEOS wireless speakers placed around the home
- Auto Update - (default - OFF), allows for firmware updates while the unit is in Standby
- 4K Signal Format (Standard/Enhanced; Note: Enhanced setting must be used when passing 4K60,4:4:4, 10 bit video)
- SAVE & LOAD (to USB; replaces Web Control SAVE/LOAD)
- Disable Zone 2 access from the remote control
- Restart - (in lieu of having to pull power cable)
- Network Reset (excludes resetting “Amp Assign”, “Speaker Config.” and “Video” settings)
- DTS:X & DTS Neural:X pre-loaded at factory
S730H/S930H/X1400H/X2400H/X3400H/X4400H/X6400H- HDMI Diagnostics (installer troubleshooting)
- Dolby Vision - (out of the box)
- Hybrid Log Gamma (HLG) - via future firmware update
- eARC (X3400H/X4400H/X6400H only) via future firmware update
What was dropped from the 2016 models?S730H/S930H/X1400H/X2400H/X3400H- Web Control
- vTuner - must use TuneIn (on board or using HEOS app) for internet radio which doesn't allow the user to manually add new stations as is the case with vTuner
- iPod/iPhone connectivity via USB
- Video Select (iPod/USB)
-------------------------
- All "S" series models have a 2 year warranty if purchased new/open-box from an authorized dealer
- All "X" series models have a 3 year warranty (2 years in Canada) if purchased new/open-box from an authorized dealer
- All refurbished models have a 1 year warranty if purchased from an authorized refurb dealer
Denon model web page info and Owner manual links -
S530BT - MSRP $279, 5.2 CH, 70W, HDMI In/Out (5/1)
This is a 5CH AVR which features Bluetooth, but
is not a networking model. Firmware updates would be installed via the USB jack. It includes a mic for a basic (ie. non-Audyssey) single position speaker/sub calibration. It can display the GUI over 2D/3D video on HDMI1 and HDMI2 and pass through 4k/60Hz video from HDMI3/HDMI4/HDMI5 but cannot display the GUI over 4k video. It uses the “Denon 500 Series Remote” Bluetooth app.
http://usa.denon.com/us/product/hometheater/avreceiversht/avrs530bt http://manuals.denon.com/AVRS530BT/NA/EN/index.phpPress release on the S530BT and S730H and S930H -
http://www.digitaltrends.com/home-theater/denon-s-series-receivers-avr-s930h-avr-s730h-avr-s530bt/ -
S730H - MSRP $479, 7.2 CH, 75W, HDMI In/Out (6.1) - avail April
Upgrading from the S530BT adds 1 more HDMI input and two more audio channels for a 7CH model and the lowest model to feature Audyssey MultEQ (6 mic positions), networking, DSD via USB/network source, Atmos/DTS:X 5.2.2, DTS:X and uses speaker posts, 32 bit DAC, and an on board Denon HEOS module (allows streaming of HEOS app music services to the AVR as well as streaming PCM 2.0 source from the AVR to HEOS wireless speakers set up around the home). Firmware updates are installed via a network connection or USB. It can display the GUI over 2D/3D video from all HDMI inputs, but not over 4k video. It features 5.1 + Zone 2 capability using the Surround Back speaker posts for Zone 2. A new SAVE/LOAD via USB feature has been added. There are no Zone 2 pre-outs. No noticeable difference in power; however, audio quality should be improved after running Audyssey.
http://usa.denon.com/us/product/hometheater/avreceiversht/avrs730H http://manuals.denon.com/AVRS730H/NA/EN/index.php -
S930H - MSRP $579, 7.2CH, 90W, HDMI In/Out (8/2, main/main outputs) - avail April
Upgrading from the S730H adds 2 more HDMI inputs, 1 more main zone monitor output (eg. when using a TV and PJ), 2 component video inputs / 1 output, 4k/30Hz upscaling, on board. No noticeable difference in either power or audio quality.
http://usa.denon.com/us/product/hometheater/avreceiversht/avrs930H http://manuals.denon.com/AVRS930H/NA/EN/index.php-
X1400H - MSRP $599, 7.2CH, 80W, HDMI In/Out (6/1) - avail May
This model is similar to the S730H in features but adds: improved audio quality using the higher Audyssey MultEQ XT (8 mic positions), Zone 2 pre-outs, Crestron/Control 4 interface, and also as the lowest "X" series model adds 1 more year of warranty (total 3 years).
http://usa.denon.com/us/product/hometheater/avreceiversht/avrX1400H http://manuals.denon.com/AVRX1400H/NA/EN/index.php Press release on the new X1400H and X2400H --->
http://www.bigpicturebigsound.com/Denon-AVR-X1400H-and-AVR-X2400H-AV-Receivers.shtml-
X2400H - MSRP $799, 7.2CH, 95W, HDMI In/Out (8/2, main/main outputs) - avail May
This model is similar to the S930H in features but adds: improved audio quality using the higher Audyssey MultEQ XT, Zone 2 pre-outs, RS-232, Crestron/Control 4 interface, ISF (Day/Night) calibration settings (to be set by an ISF calibrator) and 1 more year of warranty (total 3 years).
http://usa.denon.com/us/product/hometheater/avreceiversht/avrX2400H http://manuals.denon.com/AVRX2400H/NA/EN/index.php*** Pricing and spec information listed below this line has simply been copied from the 2016 Denon AVR Owner's thread. Models above it have been updated with the new specs. *****-
X3400H - MSRP $999, 7.2CH, 105W, HDMI In/Out (8/2, main/Zone 2 outputs) - avail July
Upgrading from the X2400H adds: Zone 2 custom settings (bass, treble, HPF, stereo/mono), 12v trigger (1), DSD over HDMI, Zone 2 HDMI Monitor output, HDMI/digital PCM 2.0 audio to Zone 2 speaker posts/pre-outs, GUI over 4k video, 4k/60Hz upscaling, and the lowest model with 7.2 main zone pre-outs. No noticeable difference in power, but much better audio quality using the more advanced Audyssey MultEQ XT32 and Sub EQ HT (dual sub level/delay).
http://usa.denon.com/us/product/hometheater/avreceiversht/avrx3400H http://manuals.denon.com/AVRX3400H/NA/EN/index.php -
X4400H - MSRP ($1599), 9.2CH, 125W, HDMI In/Out (8/2, main/Zone 2 outputs) avail Aug
Upgrading from the X3400H adds: 2 additional on board amps (with capability to expand to 11 using an external 2CH amp), a second main zone HDMI monitor output, 11.2 main zone pre-outs, Zone 3, a 2nd 12v trigger, front panel display of speaker inputs (or outputs), PHONO input, metal front panel with 2 line display, Custom 2 CH settings (using FL/FR or dedicated Front B)(LARGE/SMALL; crossover settings, sub – on/off, distance, level), one internal cooling fan, and Auro 3D pre-loaded.
https://usa.denon.com/us/product/hometheater/receivers/avrx4400Hhttp://manuals.denon.com/AVRX4400H/NA/EN/index.php-
X6400H - MSRP ($2199), 11.2CH, 140W, HDMI In/Out (8/2, main/Zone 2 outputs) avail Aug
Upgrading from the X4400H adds: 2 additional on board amps, more robust amps, HD Radio, mfr'd in Japan, gold plated connectors, Dialog Enhancer, two internal cooling fans, and the ability to use the Surround Back L speaker post for powered Auro 3D VOG/Top Surround as well as Sub pre-out #2.
https://usa.denon.com/us/product/hometheater/receivers/avrx6400hhttp://manuals.denon.com/AVRX6400H/NA/EN/index.php Welcome to the Official 2017 Denon AVR-S/X models thread (S530BT/S730H/S930H/X1400H/X2400H/X3400H/X4400H/X6400H). If this is your first visit to this thread, and you want to ask a question about one of the 2017 Denon AVR models, either one that you own or one that you are thinking of buying, please provide the following information to allow for better responses to your questions:
(a) Identify the model number in question (eg. X2400H), as there are 8 different models (S and X series) discussed in this thread. Also if you have not posted in several days since your initial post, please post the model # again so we don't have to back track to learn which model you are referencing.
(b) Identify what you've done so far to troubleshoot the issue and what the front panel is displaying if an audio issue, (also take a few minutes to review the Troubleshooting section provided in post 3 as your question may already be answered there,
(c) Unless you indicate what settings have been changed, the assumption will be that all settings are on the factory defaults (ie. usually "Auto"),
(d) If the advice given seems to simplistic or obvious, don't shoot the advice giver as we have no idea of the level of your technical understanding,
(e) If there is no response to your post, it either means no one knows the answer or it has simply been overlooked so please repost if you still haven't resolved your issue,
(f) If you post a question in this thread and are given advice and either it or some other advice (eg. Denon phone support, Denon "Ask a Question" email support) resolves your issue, have the common courtesy to post back what solution resolved your issue so others can learn from it as well,
(g) If the issue is not user error or not just a misunderstanding on how the AVR works, please call Denon support so the issue is registered,
(h) When responding to another post that is providing assistance to you, please press the "Quote" button in the lower right corner of that other poster's response so that response is also listed with your new post to provide some context, and,
(i) If you don't live in either the USA or Canada, please indicate your country location in your post as some Denon models from other regions in the world differ in configuration from their USA/Canada counterparts otherwise responses made will be regarding the USA/Canada models.
50 Replies
26763 Views