Lumagen Radiance Pro

[bmoney]

FW 090121
- Posted 101221
Bugfix for some units having a power on lockup issue where it flashes the blue light on power up and eventually can power up but without a picture.
Please continue giving us your detailed feedback on issues via email at support@lumagen.com
Update time ~1 minutes @230k from previous firmware.

[bmoney]

New pipeline update will
Most likely be posted tomorrow. Supposedly large upgrade in picture quality especially with 4k60 and upscaling 

[AVSCraig]

New pipeline update will
Most likely be posted tomorrow. Supposedly large upgrade in picture quality especially with 4k60 and upscaling

Initial reports sound fantastic. But, I might wait to upgrade until it moves out of the beta stage. I've waited this long. 

[bmoney]

i updated a few days ago.  im not good at noticing improvements but it is very stable for me.  no bugs

[AVSCraig]

The Beta 2 (060322) release for the pipeline enhancements has been posted. It adds "Letter Box Top" for bottom up masking screens and those who just want all content to be at the top of their 16:9 to 2.2 screens. It also fixes some issues with Letter Box bottom and clears up the menu for setting these modes.

There is a "Remote Type." Due to typo in the data sent to the remote control company the new Radiance Pro Remote "Input" button code is really the old code for "PiP Off." Since this actually brings down the menu (the only thing done by the Input button), as well as turning PiP off on this non-PiP remote, and to prevent a three month or so delay in the already delayed Radiance Pro remote we choose to continue and build the Radiance Pro remote. No issues doing this for most people, but one person was using the "Input shortcut menu" and the Radiance Pro remote would not bring up this menu when pressing Input on the Radiance pro remote. The new Remote Type can be set to allow the Radiance Pro remote to bring up the "Input shortcut menu" when the Input button is pressed.

Based on feedback the Subtitle Feature "down-arrow" now moves the bottom edge of the active video up by 6%, and then 10% (rather than Beta 1's 8% and 12%). Note that for some aspects (e.g. 2.00 on a 16:9), the first down arrow move only enough to make the raster below the active image visible down to the bottom of the source raster, and this is less than 6%.

The FPGA timing looks very good, but please let us know if you have any issues with Beta 2.


Here is the release log:

Beta 060322- Posted 061422 Beta 2 of the Pipeline Enhancement update. Adds "Top" option to orient letterboxed video formats to the top of video output. This setting is in the menu under Input: In Configs: RES: Sizing: Lbox Control and previously options for Bottom, Zoom, Off . Fix for Lbox Control: Off when output aspect is > 1.78. Subtitle shift feature now shifts by 6 & 10% (was 8 & 12%). Fix for some cases of masking that could cause black screens or black & white video. Fix for hdcp delay use that could cause video loss or diamond hatch pattern to appear on output. Bugfix for using NLS with 4k sources when using 9Ghz input cards. A precision improvement for 4k sources when using 9Ghz input cards Bugfix for incorrect video mode id with 4096 pixel wide 4k output modes sent on HDMI output which could confuse some devices downstream of the Pro. Added a remote control type setting in menu under Other: I/O Setup: Remote Ctl, for some different Lumagen remotes if you're using the Input button on the Lumagen remote. Cleared up some confusing language in the Global: Video: Features menu. Fix for incorrect zooming with Lbox Control set to bottom. Other minor bugfixes and improvements.


http://www.lumagen.com/testindex.php?module=radiancepro_updates

[bmoney]

Beta 1 has been flawless for me. 

[AVSCraig]

Beta 1 has been flawless for me.

Been working great for me too. New firmware update - 


 Beta 062222- Posted 063022  Beta 2 fixup of HDR desat function broken in 060322. Fix for input vertical shift problems with junk video displayed on bottom of screen. Please continue giving us your detailed feedback on issues via email at support@lumagen.com
  Update time ~5 minutes @230k from previous firmware.

http://www.lumagen.com/testindex.php?module=radiancepro_updates

[bmoney]

Next update should have more ratio aspects in it. I’m excited for that

[bmoney]

A few updates have been out since the last so make sure your in the latest beta if so. Word is the full go version should be out shorty 

[bmoney]

Also they are working on improving the DTM a bit as well coming up now that pipeline is finished. 

[bmoney]

Beta 081722- Posted 082922  Beta 4 of the Pipeline Enhancement update. 

Update

[bmoney]

http://www.lumagen.com/testindex.php?module=radiancepro_updates

Production candidate 090822- Posted 091922 
Minor fpga performance improvements.
Added auto aspect detection for 2.10 input aspect if extended aspects are enabled. 
Please continue sending your detailed feedback to support@lumagen.com
Update time ~5 minutes @230k from previous firmware.

[bmoney]

http://www.lumagen.com/testindex.php?module=radiancepro_updates

Production candidate 091922- Posted 092622  
Fix for input aspect occasionally not triggering when source videos aspect change.
Some other small input aspect fixups. 
Please continue sending your detailed feedback to support@lumagen.com
Update time ~1 minutes @230k from previous firmware.

[AVSCraig]

I'll install this after Cedia.

[bmoney]

New firmware (Production Candidate) available for the Radiance Pro series:

Changelog:
Production candidate 091922 - Fix for input aspect occasionally not triggering when source videos aspect change. Some other small input aspect fixups.

DDL: Lumagen