AVS Discussions

Can V6 be used with a Seymour Premier frame?

Rick

Can V6 be used with a Seymour Premier frame?
« on: November 02, 2016, 10:23:41 AM »
Hello!  Just wondering if the V6 screen material can be used with a Seymour Premier (flat) frame.

Is it pretty much frame agnostic and can be made to fit anything?

Thanks!

Re: Can V6 be used with a Seymour Premier frame?
« Reply #1 on: November 02, 2016, 11:28:18 AM »
Absolutely, if you would like a sample, we will be happy to send you one - just ask Mike or Craig!

Re: Can V6 be used with a Seymour Premier frame?
« Reply #2 on: November 02, 2016, 12:35:41 PM »
Hello!  Just wondering if the V6 screen material can be used with a Seymour Premier (flat) frame.

Is it pretty much frame agnostic and can be made to fit anything?

Thanks!

Should be able to fit. You just need a small flat area a little over 1/4" wide to fasten the grip rail. Do you want to take a closeup picture of the back of your frame?
Mike Garrett
AV Science Sales
585-671-2968
mike@avscience.com

JVC, Sony, Epson, Marantz, Denon, Yamaha, Onkyo, Stewart, Seymour, Screen Innovations, Screen Excellence, DNP, Carada, Da-Lite, Vutec, Triad, SVS, Martin Logan, Def Tech, RBH, M&K and many other brands.

Rick

Re: Can V6 be used with a Seymour Premier frame?
« Reply #3 on: November 04, 2016, 11:04:08 AM »
Hey Mike,

Still in the design phase and don't actually have one, but this link has some good pics:

http://www.audiogurus.com/learn/displays/projector-screens/seymour-av-screen-review/2970

http://www.audiogurus.com/learn/wp-content/uploads/2014/12/Seymour-AV-Premier-grommets.jpg
Can V6 be used with a Seymour Premier frame?


Can you tell from those?

Re: Can V6 be used with a Seymour Premier frame?
« Reply #4 on: November 15, 2016, 09:12:53 AM »
Hey Mike,

Still in the design phase and don't actually have one, but this link has some good pics:

http://www.audiogurus.com/learn/displays/projector-screens/seymour-av-screen-review/2970

http://www.audiogurus.com/learn/wp-content/uploads/2014/12/Seymour-AV-Premier-grommets.jpg
Can V6 be used with a Seymour Premier frame?


Can you tell from those?

Need to see all of the back. You can also look here and see the grip rail that needs to fit on the back of the frame.
http://discuss.avscience.com/?topic=119.0
Mike Garrett
AV Science Sales
585-671-2968
mike@avscience.com

JVC, Sony, Epson, Marantz, Denon, Yamaha, Onkyo, Stewart, Seymour, Screen Innovations, Screen Excellence, DNP, Carada, Da-Lite, Vutec, Triad, SVS, Martin Logan, Def Tech, RBH, M&K and many other brands.

ellisr63

  • ***
  • 478
  • Surfing in the Home Theater
Re: Can V6 be used with a Seymour Premier frame?
« Reply #5 on: November 15, 2016, 09:33:43 AM »
Did I do my frame backwards? I have my screen attaching to the front of my extruded aluminum frame. I did this because my frame is not painted black. I then made a wood frame covered in black velvet that sits against the front of the frame.
Yamaha CX-A5100, (3) diy synergy horn 2 ways,, 4 JBL 8340As, 4 JBL 8320s, PS3, XBoxOne, Monoprice speaker wire, and XLR cables, Redmere HDMI cables, Monster HTPS7000, 2 Furman filters, SeymourAV 195" diagonal scope screen, Panamorph UH-480, Darbee Darcet, diy 14 channel Ice Power amp

Re: Can V6 be used with a Seymour Premier frame?
« Reply #6 on: November 18, 2016, 07:20:09 AM »
Did I do my frame backwards? I have my screen attaching to the front of my extruded aluminum frame. I did this because my frame is not painted black. I then made a wood frame covered in black velvet that sits against the front of the frame.

No, I would attach to the front also, but I would paint aluminum frame black. :)
That is what I did, but my frame is zero void laminated Baltic Birch, cut on a curve.
Mike Garrett
AV Science Sales
585-671-2968
mike@avscience.com

JVC, Sony, Epson, Marantz, Denon, Yamaha, Onkyo, Stewart, Seymour, Screen Innovations, Screen Excellence, DNP, Carada, Da-Lite, Vutec, Triad, SVS, Martin Logan, Def Tech, RBH, M&K and many other brands.

ellisr63

  • ***
  • 478
  • Surfing in the Home Theater
Re: Can V6 be used with a Seymour Premier frame?
« Reply #7 on: November 18, 2016, 09:22:49 AM »
No, I would attach to the front also, but I would paint aluminum frame black. :)
That is what I did, but my frame is zero void laminated Baltic Birch, cut on a curve.
Did you wrap the screen from the rear around to the front...or is the screen 100% in front of the frame? My screen is 100% in front of the frame.
Yamaha CX-A5100, (3) diy synergy horn 2 ways,, 4 JBL 8340As, 4 JBL 8320s, PS3, XBoxOne, Monoprice speaker wire, and XLR cables, Redmere HDMI cables, Monster HTPS7000, 2 Furman filters, SeymourAV 195" diagonal scope screen, Panamorph UH-480, Darbee Darcet, diy 14 channel Ice Power amp

Re: Can V6 be used with a Seymour Premier frame?
« Reply #8 on: November 21, 2016, 06:19:39 AM »
Mine is on the front of the frame with separate velvet covered trim. You could wrap around to the back. That would work very well.
Mike Garrett
AV Science Sales
585-671-2968
mike@avscience.com

JVC, Sony, Epson, Marantz, Denon, Yamaha, Onkyo, Stewart, Seymour, Screen Innovations, Screen Excellence, DNP, Carada, Da-Lite, Vutec, Triad, SVS, Martin Logan, Def Tech, RBH, M&K and many other brands.

ellisr63

  • ***
  • 478
  • Surfing in the Home Theater
Re: Can V6 be used with a Seymour Premier frame?
« Reply #9 on: November 21, 2016, 09:23:18 AM »
Mine is on the front of the frame with separate velvet covered trim. You could wrap around to the back. That would work very well.
I did mine the right way then. :)
Yamaha CX-A5100, (3) diy synergy horn 2 ways,, 4 JBL 8340As, 4 JBL 8320s, PS3, XBoxOne, Monoprice speaker wire, and XLR cables, Redmere HDMI cables, Monster HTPS7000, 2 Furman filters, SeymourAV 195" diagonal scope screen, Panamorph UH-480, Darbee Darcet, diy 14 channel Ice Power amp